Phone Case Printer – Four Specs to Think About Whenever Buying a Phone Case Printer.

Would you like to put in a photo to the quilt that looked similar to part of the fabric than an iron-on decal?

In past times, we relied on photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a fantastic new way to get your best photo from your scrapbook and onto your quilt block.

Direct-to-garment (DTG) printing is a kind of digital printing. With a expense of about $20,000, it’s not practical to perform out and get your own DTG printer. The standard price for latte printer is $8 to $10.

This process might be a more pricey compared to traditional photo transfer method. That’s partially as the technology is so new. Should you do choose to try out a DTG photo on your memory quilt block, there are some things to look for when deciding on the printer who will perform do the job:

1. Be sure there are actually no chemicals found it necessary to pre-treat your fabric first. Some DTG printers create a graphic that may be much more like screen printing. You don’t want that appear or feel in your quilt. The ink is going to be hard on top of the material and will eventually (sometimes much earlier than later) are going to crack and wear with washings. Ask your prospective printer to find out a sample of something they’ve printed. Provided you can notice the ink is raised over the surface by any means whatsoever, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a form of digital DTG printing available from the Brother GT 541. You will find no chemicals needed to pre-treat the material. The inks bond using the natural fibers and so are heat cured to set the image. The inks are water based, that helps leave a soft yet crisp image on your fabric.

There are some downfalls to using a4 uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form an electronic digital printing, there is absolutely no white ink. White is the lack of color. Consequently you cannot print a picture on dark blue or black fabric.

Digital garment or fabric printing is a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to obtain a full spectrum of accurate colors – simply not white. There are DTG printers that print white ink, but the majority of people require chemical pre-therapy for the fabric and will give you that thick surface print.

You should utilize a light colored or neutral fabric and it needs to be cotton or possibly a cotton blend. The fabric must have the capacity to withstand 350 degrees for roughly 30 seconds. In case you are not 09dexypky with totally cotton or perhaps a 50/50 blend, ask your printer if the fabric will continue to work.

Size of your print could be a limitation. Most DTG printers have a printing field up to 14 inches x 16 inches. For almost all quilters, that size range won’t be considered a problem.

And talking about printing fields, here’s a hint. Most direct to garment printer charge for the 14×16 surface. When your blocks enables 2 or 3 photos to suit within that range, you could get them printed for the price of one. Consult with the printer to see if it’s possible together with your particular project.

Like most technological advances, the price tag on digital garment (or fabric) printing will probably decrease over time. Maybe it is going to even be seen on smaller printers for home and private use. Until then, see if you can look for a DTG printer for your forthcoming photo quilt project. The outcomes may be like custom fabric, that is to be a great touch for your original quilt!